What measures should be taken if there is water in floor boring and milling machine

The service life of a floor boring and milling machine, with the usual maintenance of the operator is indispensable. If when the floor boring and milling machine water, the operator should take what measures? Xiaobian summarizes a few, I hope to help you.

1, cut off the power supply, prevent electric shock, prevent the expansion of the fault.

2. Unload the electrical equipment soaked in water.

3. If the components are soaked in turbid water, the chassis should be dismantled and cleaned with clean water.

4. Drain the water on the components and components.

5. Put the damp components and components into the oven to dry. If you do not have the oven, you need to expose the damp components and components to the sun for several days.

6. Reinstall the removed parts.

7. Electrify the baked parts and components one by one to test their integrity.

8, by the relevant personnel to check the parts, components back to the machine.

9, boot, combined adjustment, sports car, normal use.

Guilong manifold blocks